這里分享一些
通過式噴淋清洗機的使用細節,期望可以幫助大家降低自己產品的不良率,提升產品的清潔質量和使用期限。
Here are some details about the use of the through spray washer, hoping to help you reduce the defective rate of your products and improve the cleaning quality and service life of the products.
一、產品質量
1、 Product quality
與質量有關的幾個關鍵字:黃斑、氧化、劃花、殘余
Key words related to quality: macula, oxidation, scratching, residue
1、加工過程中全部環節應杜絕裸手觸碰工件,全部工作人員需戴口罩及多層手套工作,以避免工作人員的手出汗或說話時有一定量的唾液濺到商品上,導致產品上有氧化點產生(不過這個要存放長期才看得出);
1. During the whole processing process, it is prohibited to touch the workpiece with bare hands. All workers need to wear masks and multi-layer gloves to work, so as to prevent the workers' hands from sweating or a certain amount of saliva from splashing on the goods when talking, which may cause oxidation points on the products (but this can only be seen after a long period of storage);
2、不一樣的產品開展歸類除污,可防止產品劃花,不可以劃傷的商品選用插片式清潔;
2. Different products shall be classified and decontaminated to prevent product scratches. Products that cannot be scratched shall be cleaned by inserting pieces;
3、嚴格按照廠家出示的清潔方式參與作業清潔;
3. Participate in the operation cleaning in strict accordance with the cleaning method shown by the manufacturer;
4、定期維護烘干設備的使用實際效果,避免烘干機的實際效果不佳(環境溫度過高或者過低)造成產品表層有殘留。
4. Regularly maintain the actual effect of drying equipment to avoid residue on the product surface due to poor actual effect of the dryer (too high or too low ambient temperature).
二、成本費用
2、 Cost
切記產品加工后應當及時進行清潔作業,且安放的時間不適合高于一個禮拜,那樣的話,清潔后的產品,光澤質量更好,并且清洗液的消耗量也相對少些;
Keep in mind that the products should be cleaned in time after processing, and the storage time should not be longer than one week. In that case, the cleaned products will have better luster quality and less detergent consumption;
記得采用合適的清洗籃,因為這樣可以降低清洗籃帶出來的清洗液的使用量(通常情況下,工件清洗籃的紗網密度越小,拉出清洗液就多)。
Remember to use a suitable cleaning basket, because this can reduce the amount of cleaning solution brought out by the cleaning basket (usually, the smaller the mesh density of the workpiece cleaning basket, the more cleaning solution will be pulled out).
For more information about hydrocarbon vacuum ultrasonic cleaner, please contact us or visit our website www.rllrhm.com!