如今越來越多的行業都使用清洗機來提升工作效率，達到理想的效果。高壓去毛刺清洗機其實并不是一款簡單的清潔設備，更多的是一款除垢除銹強化設備。下面隨著小編一起來認識一下高壓去毛刺清洗機的一個問題吧。

Nowadays, more and more industries are using cleaning machines to improve work efficiency and achieve ideal results. The high-pressure deburring and cleaning machine is not a simple cleaning equipment, but more a scaling and rust removal strengthening equipment. Let's learn about a problem of high-pressure deburring and cleaning machine with Xiaobian.

1.高壓去毛刺清洗機開啟后水泵有異響或壓力不穩定，未達到機器額定壓力。

1. After the high-pressure deburring and cleaning machine is started, the water pump makes abnormal noise or the pressure is unstable, which does not reach the rated pressure of the machine.

A.檢查進水管是否有水，送水管（噴水槍）是否打開，避免進水管路水時有時無且無空氣進入。

A. Check whether there is water in the water inlet pipe and whether the water supply pipe (water spray gun) is opened to prevent water and air from entering the water inlet pipe.

B.供水不足，檢查吸水管尺寸，如有必要可換用直徑較大水管，同時查看水有無壓力，進水壓力太小，直接影響水的供應不充分（如果是直接使用自來水龍頭給水，一定要查看管路水流量是否及時供應，且無空氣進入，如果是采用外部水源，建議用小型增壓泵給機器補水或用自備水箱）。

B. If the water supply is insufficient, check the size of the suction pipe. If necessary, replace the water pipe with a larger diameter. Meanwhile, check whether the water has pressure. If the water inlet pressure is too small, it will directly affect the insufficient supply of water (if the tap is directly used for water supply, check whether the water flow in the pipeline is timely supplied and no air enters. If the external water source is used, it is recommended to use a small booster pump to replenish water for the machine or use a self-contained water tank).

C.調壓閥未打開或未有效調節，正確調節閥門并且查看噴嘴，如果噴嘴過大或磨損，應更換噴嘴。

C. The pressure regulating valve is not opened or adjusted effectively. Adjust the valve correctly and check the nozzle. If the nozzle is too large or worn, replace the nozzle.

D.檢查活塞密封墊（水封，O型圈）有無磨損并檢查機器進水過濾器有無堵塞，清潔過濾器，如果是不清潔的水源造成過濾網經常堵塞，可大外置過濾器，或更換潔凈水源。

D. Check whether the piston sealing gasket (water seal, O-ring) is worn and whether the water inlet filter of the machine is blocked. Clean the filter. If the filter screen is often blocked due to unclean water source, the external filter can be enlarged or the clean water source can be replaced.

E.如果是發動機引擎驅動高壓去毛刺清洗機，應檢查發動機的轉速是否調整正常以及皮帶是否掉落打滑。

E. If it is an engine driven high-pressure deburring and cleaning machine, check whether the engine speed is adjusted normally and whether the belt falls and slips.

2.高壓去毛刺清洗機水泵噪音過大，水泵有壓力，但有強烈的脈動和震動。

2. The noise of the water pump of the high-pressure deburring and cleaning machine is too loud. The water pump has pressure, but there is strong pulsation and vibration.

A..水泵軸承損壞，更換軸承或檢查高壓去毛刺清洗機水泵和動力的連接問題，彈性連軸器有無磨損以及皮帶連接有無滑輪的狀態。

A. If the water pump bearing is damaged, replace the bearing or check the connection between the water pump and the power of the high-pressure deburring and cleaning machine, whether the elastic coupling is worn, and whether the belt is connected with pulleys.

B.當高壓水泵產生強烈的脈動和震動時，應該檢查水泵入口處水溫是否過高。

B. When the high-pressure water pump generates strong pulsation and vibration, first check whether the water temperature at the inlet of the water pump is too high.

C.閥門里有異物，清潔閥門。

C. There is foreign matter in the valve. Clean the valve.

此外您在選購該設備時要注意，不同生產的清洗機肯定有其突出的優勢與細節，這時就看這些細節是不是自己所需求的。更多注意事項就來我們網站www.rllrhm.com咨詢了解吧。

In addition, when you buy this equipment, you should pay attention to the fact that cleaning machines produced by different brands certainly have their outstanding advantages and details. At this time, it depends on whether these details are what you need. For more precautions, please visit our website at www.rllrhm.com.