將零件放入籃筐中，設定好時間，清洗時間到即可取出零件。緊湊設計的轉盤能節省空間，由于出口和入口在同一位置，所以該設備僅需一名操作工。轉盤式清洗廣泛用于汽車行業和有清洗需求的各類金屬制造行業

Put the parts into the basket, set the time, and take out the parts when the cleaning time is up. The compact design of the turntable can save space, because the exit and entrance are in the same position, so only one operator is needed for the equipment. Rotary cleaning is widely used in automobile industry and various metal manufacturing industries with cleaning demand

設備原理：

Equipment principle:

該設備也被稱為自動零件清洗機，它采用箱式密封清洗形式，是一種以機械能、液流能為主的的清洗設備。本系列自動零件清洗機由清洗箱蓋、清洗室體、旋轉清洗工作框及底架、驅動減速機、水箱系統、噴淋清洗系統、電控系統等組成。底架上裝有水箱及水泵。

The equipment is also known as the automatic parts cleaning machine, which adopts the form of box seal cleaning. It is an efficient and energy-saving cleaning equipment based on mechanical energy and liquid flow energy. This series of automatic parts cleaning machine consists of cleaning box cover, cleaning chamber body, rotating cleaning frame and underframe, driving reducer, water tank system, spray cleaning system, electric control system, etc. The underframe is equipped with a water tank and a water pump.

上部為清洗室，工作時工件裝在旋轉框內，關閉上部箱蓋，水箱中的清洗液在水泵的作用下通過管道將清洗液加壓后直接噴射于旋轉工作框內的被清洗件上，同時通過驅動裝置帶動工作框旋轉，使被清洗工件得到的清洗。

The upper part is the cleaning room. When working, the workpieces are installed in the rotating frame. Close the upper box cover. The cleaning liquid in the water tank is pressurized by the water pump and sprayed directly on the cleaned parts in the rotating frame. At the same time, the driving device drives the working frame to rotate, so that the cleaned workpieces can be cleaned in an all-round way.

由于壓力射流作用，使被清洗件表面的油污，鐵屑、殘渣很快被剝落清洗下來。清洗液經過濾系統過濾并對工件進行清洗后重新回流清洗水箱循環使用。清洗結束后，水泵停止工作，打開箱蓋，由人工取出工件，完成整個工藝過程。

Due to the effect of pressure jet, the oil, iron filings and residues on the surface of the cleaned parts are peeled off and cleaned quickly. The cleaning liquid is filtered by the filtering system and cleaned the workpiece, and then returned to the cleaning water tank for recycling. After cleaning, the water pump stops working, the box cover is opened, and the workpiece is taken out manually to complete the whole process.

山東通海機械專注行業經營多年，專注于噴淋清洗機的生產及研究，歡迎大家點擊我們的網站http://www.rllrhm.com進行咨詢及了解，歡迎大家訪問.

Shandong Tonghai machinery has been engaged in the industry for many years, focusing on the production and research of spray cleaning machine. Welcome to our website http://www.rllrhm.com For consultation and understanding, welcome to visit